KurTwo2 Instrument Panel
KurTwo2 Instrument PanelDavid has completed the custom instrument panel for his Merkur XR4Ti KurTwo2. Below are some pictures showing the panel as well as the gauges, as well as some additional information.
Front View of Custom Instrument Panel
David writes: "The wiring connects via 3 connectors. The two circular connectors connect to the existing vehicle harness. The "shift" and "pump inop" lights connect through a weather pack connector. The pump inop warning light will be wired through a relay to the hot lead to the electric water pump. If the pump is not turned on or fails where it will blow the fuse the pump inop light will let me know a bunch quicker than the water temp gauge can respond."
The black looking rectangle in the lower left is the warning light bar from a fuel/temp gauge. As you can tell, above that is the Merkmeter air/fuel ratio meter. Other instrumentation includes Autometer speedometer & odometer, voltmeter, and fuel gauge.
Back View of Instrument Panel
Close Up of Back View of Instrument Panel
For more information, send David an e-mail at DGodfrey@DRS-TEM.com .
Back to David Godfrey's Page Back to Site Home Page
MORE POWER!